Draft standards for public comments - Engineering Standardization

01) Draft Sri Lanka Standard Specification for Gas cylinders — Valve protection caps and guards — Design, construction and tests (ISO 11117:2019)

02) Draft Sri Lanka Standard Specification for Graphical symbols — Vocabulary (ISO 17724:2003)

03) Draft Sri Lanka Standard Specification for Gas cylinders —  17E and 25E taper threads for connection of valves to gas cylinders —Part 1: Specifications (ISO 11363-1:2018)

04) Draft Sri Lanka Standard Specification for Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges (ISO 13363-2:2017)

05) Draft Sri Lanka Standard Specification for Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification(ISO 15245-1:2001)

06) Draft Sri Lanka Standard Specification for Head forms for use in the Testing of protective helmets (Second Revision) (SLS 1069)

07) Draft Sri Lanka Standard Specification for Sanitary Appliances (Vitreous China) (First Revision) (SLS 229:202X)

Sri Lanka Standards Institution invites comments from the public and other interested groups, on the above draft standards.

The comments received will be considered by the relevant committees of the Sri Lanka Standards Institution before these draft standards/amendment are finalized.

Copies of the above draft standards from the Engineering Standard Division, also from the Documentation & Information Division of SLSI, can be obtained free of charge and also downloadable from www.slsi.lk
Other Draft Standards can be purchased from the SLSI Library.

Comments should reach me on or before 2021-03-01

Director General
Sri Lanka Standards Institution
No. 17, Victoria Place
Elvitigala Mawatha, Colombo 08.
Tel: 011 – 2671567 – 72,
Fax : 011-2671579
E- mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Web:www.slsi.lk

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Draft Sri Lanka Standard Specification for Portland Composite Cement   SLS XXX: 2020 

   The Sri Lanka Standards Institution invites comments from the public and other interested groups, on the above draft standard.

 The comments received will be considered by the relevant committees of the Sri Lanka Standards Institution before this draft standard is finalized.

Copies of the above draft standard can be obtained from the Documentation & information Division of Sri Lanka Standards Institution and also downloadable from www.slsi.lk .

   Comments should reach me on or before 2021-01-02

Director General,

Sri Lanka Standards Institution,

No. 17, Victoria Place

Elvitigala Mawatha, Colombo 08

Tel: 011 – 2671567 – 72

E mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 ...................................................................................................................................................................................................................................................

01.        Draft Sri Lanka Standard Specification for Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 1: Metallic Materials (ISO 11114: Part 1)

02.       Draft Sri Lanka Standard Specification for Gas cylinders - Compatibility of cylinder and valve materials with gas contents – Part 2: Non-Metallic Materials (ISO 11114: Part 2)

03.       Draft Sri Lanka Standard Specification for Gas cylinders – Terminology (ISO 10286: 2015)

04.       Draft Sri Lanka Standard Specification for Gas cylinders –Non destructive testing – Qualification and Certifications of NDT personals (ISO 9712: 2012)

05.       Draft Sri Lanka Standard Specification for Gas cylinders – cylinder valves – Specification and type testing (ISO 10297: 2014)

06.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 1: Design principle for safety signs and safety markings (ISO 3864 -1: 2011)

07.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 2: Design principle for product safety labels (ISO 3864 – 2: 2016)

08.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 3: Design principle for use in safety signs (ISO 3864 – 3: 2016)

09.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 4: Colorimetric and photometric properties of safety sign materials (ISO 3864 – 4: 2012)

10.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Registered safety signs (ISO 7010: 2011)

11.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – safety way guidance systems (SWCS) (ISO 16069: 2017)

12.      Draft Sri Lanka Standard Specification for Crankcase lubricating oils for internal combustion diesel engines SLS 1373 (First Revision)

13.      Draft Sri Lanka Standard Specification for Crankcase lubricating oils for internal combustion gasoline engines SLS 1374 (First Revision)

14.       Draft Sri Lanka Standard Specification for Gear lubricants (Extreme pressure gear oil) SLS 1396 (First Revision)

15.      Draft Sri Lanka Standard Specification for four Stroke cycle gasoline engine lubricating oil SLS 1409 (First Revision)

16.      Draft Sri Lanka Standard Specification for Two – stroke cycle gasoline engine lubricanting oil SLS 1446 (First Revision)

 17.       Draft Sri Lanka Standard Specification for House hold and similar electrical appliances – Safety Particular requirements for electric fence energizers (IEC 60335-2-76)

18.       Draft Sri Lanka Standard Specification for Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests (IEC 61558-1)

19.       Draft Sri Lanka Standard Specification for Safety of transformers, reactors, power supply units and combinations thereof – Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units (IEC 61558-2-5)

20.       Draft Sri Lanka Standard Specification for Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications(IEC 62776)

21.       Draft Sri Lanka Standard Specification for Protective helmets for vehicle users SLS 517 (Second Revision)

 The Sri Lanka Standards Institution invites comments from the public and other interested groups, on the above draft standards.

The comments received will be considered by the relevant committees of the Sri Lanka Standards Institution before these draft standards are finalized.

Copies of the above draft standards 12,13,14,15,16 and 21 can be obtained free of charge from the Documentation & information Division of Sri Lanka Standards Institution and also downloadable from www.slsi.lk .Other draft standards can be purchased from the SLSI library

Comments should reach me on or before 2020-12-02

Director General,

Sri Lanka Standards Institution,

No. 17, Victoria Place

Elvitigala Mawatha, Colombo 08

Tel: 011 – 2671567 – 72

E mail: This email address is being protected from spambots. You need JavaScript enabled to view it.